Benefits of Zamak Die Casting

Zamak die casting is a beneficial process because it exploits the characteristics of the alloy in question, which are high in performance and unique in the sector. Zamak (Z-Zinc, A-Aluminum, MA-Magnesium, K-Copper in the German language), is an alloy that is prepared mainly of high purity zinc mixed with small percentages of aluminum, magnesium, and copper. Due to the contribution to these elements hardness and resistance to zinc are observed, which otherwise would be fragile and not very resistant.

In starting it was used for decorative applications or contour pieces. However, improvement has been seen in time and it has been able to perform more important functions. To other high-performance casting materials such as aluminum, magnesium, and brass now you can compare the mechanical properties of Zamak. So, with Zamak die-casting, you can get ribs, better finishes, and precise walls from zamak die casting supplier because it is a particularly uniform alloy, which does not need continuous processing.

With minimum tolerance limits and complex shapes can be obtained by the high fluidity and low melting point of the Zamak, which with the other alloys becomes difficult or impossible to achieve. This is the reason why Zamak is highly used and is preferred to other alloys, particularly in the components sectors, furniture, hardware, and clothing. In addition, compared to other processing techniques Zamak die-casting is less expensive, so the production costs of the pieces are low, but this is not problematic to the quality of the final products.

Zamak die casting and recycling

The benefits are not limited to quality but also related to the environment. Compared to other materials Zamak die-casting has a reduced impact on the atmosphere because the transformation of the raw material into the finished product collects less energy. From the zamak die casting manufacturers after performing the process the pollutants derived are limited because the melting cycle is faster and the temperature used is lower. Zamak is a material that provides great resistance to wear, so it lasts over time and does not need frequent replacement, with the consequent savings in terms of disposal and processing. Hence, the products become completely recyclable if the die-casting of the Zamak has been carried out correctly.